The new AiM MyChron5 S 2T has unlike ist predecessor a 25Hz GPS-Module, highre processing power and a new WiFi-Module, making data
Transfer much faster than with MyChron5. It has a high-resolution graphical display for the indication of rpm, speed,lap times, gear,
temperature (one or two with the MC5s 2T), satellite reception and the data from the connected expansions as the lambda or MC-Expansion.
It is possible to configure several display pages free and to select them over the 4 buttons. The display-illumination can be set in 7
different colors and the brightness is controlled by a light-sensor.
The Speed is gathered over the integrated 25Hz GPS-Module,
indicated on the display and can later with further GPS-channels, e.g. driven line, acceleration… be analyzed on the PC. The screwed on
Lithium battery supplies the MyChron5 S 2T ten hours with power and can then be either charged or swapped. It also can be supplied by an
external battery.
MyChron5 S 2T has two in seven various colors configurable Alarm-LEDs and 5 Shift-LEDs. Both Alarm LEDs can be
assigned to every arbitrary measurement and shift-LEDs can be set sequentially, in full group and gear-selective. Over the WiFi-Connection
the configurations can be transferred, the data downloaded or the measurements online checked.
All sensors and cables from the
MyChron4, MyChron5, as also MyChron- Expansion, Lambda-system and SmartyCam can also be used on the MyChron5 S 2T.
Special features MyChron5 S 2T
- free configurable graphical display
- multicolord configurable background illumination
- 5 RGB shift-lights
- 2 RGB Alarm-lights
- Lap times with up to 5 split times
- Light sensor for the illumination
- integrated 25Hz GPS08 Module
- WiFi connection
- 4 GB storage
- Gyroscope
- Lithium battery
Connection example AiM MyChron5 S 2T
Technical data AiM MyChron5 S 2T
| RPM | Tapping inductive from the ignition cable Measuring range 0 up to 60.000 rpm |
| Time measurement | Triggering over infrared, manual or GPS Lap times without limits, up to 5 Split times Measuring accuracy 1/100 sec. |
| Analogue channels | Only over MyChron Expansion |
| Temperature | 2 Input Thermoelement 0 – 999 °C, measuring accuracy + 0,75% Thermo resistance up to 180 °C, measuring accuracy + 1° 2 Alarm-LED's when exceeding or falling below the set alarm values Indication in °C or °F |
| Speed | Gathering over integrated GPS or MyChron Expansion with sensor |
| Gear indication | Calculated out of rpm and GPS speed |
| Connectors | 1x Binder 711-3 | 1x Binder 711-4 | 1x Binder 711-5 |
| Shift-light | 5 free configurable RGB LEDs arbitrary for each gear |
| Additional functions | Displays the difference to the fastest lap at the split times Lap time projection WiFi connection Light sensor for display illumination Free configurable Display indication 2 RGB Alarm-lights, free configurable multicolored Background illumination Gyroscope |
| Data storage | Non-volatile 4 GB-Storage |
| Data transfer | WiFi 802.11 |
| Power supply | internal lithium battery (10 hours) optional over external 12V Battery |
| Updates | Software- and Firmware updates for free over the internet |
| Dimensions | Housing: 137 x 88 x 47 Display: 94,6 x 46,1 |
| Weight | 340 gr |
The functions of the MyChron5 S 2T
 |
|||||
| 1 | 2 RGB Alarm lights, free configurable | 2 | integrated 25Hz GPS Module | 3 | WiFi Module |
| 4 | 5 RGB shift-lights, free configurable | 5 | 4 Display metal buttons with various functions | 6 | Analogue rpm indication, free configureable |
| 7 | Gear indication | 8 | Light-sensor for illumination | 9 | RPM indication |
| 10 | Speed indication | 11 | Lap time indication | 12 | free configurable display part |
The connections of the MyChron5 S 2T
 |
|||||
| 1 | Connection 7 pin for temperature sensor | 2 | Connection 4 pin for lap time | 3 | Connection 5 pin for expansion or power supply |
| 4 | Connection for rpm sensor | 5 | Exchangeable lithium battery | 6 | M8 mounting screw |
There are no reviews yet